Loose Source and Record Route. Please note that margins must be adjusted to avoid printing outside of the ticket boundaries. After a problem develops, stop the capture immediately. The DNS name can be the name specified for the host in the Hosts file. Decide if you want it as your default printer. Decide if you want to share the printer – if so, give it a ‘share’ name ex.

Uploader: Dulmaran
Date Added: 23 June 2009
File Size: 26.93 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3066
Price: Free* [*Free Regsitration Required]

They can also be set through the control panel and Web Menus.


More support may be added in the future as needed. LPQ – requests printer status.

In portrait mode, you can manually 44 the height for any ticket length up to 11 inches. The syntax of the command is: Raw TCP protocol data from Host to printer port Fully tested under windows and working. See each listing for international shipping options and costs. While Word allows you to manipulate the page size in both portrait and landscape modes, the data sent to the printer only functions properly in portrait mode.


It should be able to handle IP datagrams up to bytes.

Bcoa must send its responses through a gateway in order to reach the destination host. We are always looking for Please refer to the following Microsoft Articles for possible solutions. Click Next and then click Finish.

Installing an LPR port on Windows Unit is sold as pictured missing cover. This command permanently stores the timeout value in flash. Decide if you want it as your default printer.


Any previously stored data will be flushed. You may have to scroll all.

This command returns the IP address of the printer in the form. The syntax of the command is:.

Test Program & Firmware

Normally, the printer will auto-negotiate its port configuration with the network. At this point, any copy command issued to LPT2: Go to next step either way. Set Protocol to Raw. This can also be set using the ‘Factory Menu’. The blinking cursor indicates the current IP numeric value selected.

Recent Drivers  LAVA C81 MODEM DRIVER

Boca Systems – Ticket Printers, Kiosk Printers

Set Static IP address. Each item below must be completed with the indicated acknowledgement. Only LPD capable printers can be the destination for print jobs.

Select Create a new port.

We do not have tools for communicating bi-directionally in Linux and Mac environments. You must re-assign a valid font size to guarantee the proper font representation on your screen. The default mask is 0 0. You would have to check the documentation for the switch to see if this is possible and, if so, to see how to do this.

It is recommended that you use the same one we do so that the captured packet data can be analyzed here.